Gear Finishing Technology


Popular Post

08.11.2017 - 09.11.2017

Gear Finishing Technology


Manfred-Weck-Haus
Steinbachstr. 19
52074 Aachen
Werkzeugmaschinenlabor WZL der RWTH Aachen 
Prof. Dr.-Ing. Fritz Klocke, WZL der RWTH Aachen
Prof. Dr.-Ing. Christian Brecher, WZL der RWTH Aachen 

1050.00 € Gear Finishing Technology

840.00 € Gear Finishing Technology
(member of the WZL Gear Research Circle)



Noise behaviour and load carrying capacity are important criteria for competitive power transmissions. Furthermore gear design aspires an increase in power density which leads to the demand of higher accuracy. The challenges to development, design and manufacturing of modern power transmissions are to meet these high requirements considering economic efficiency. To meet these requirements soft and hard finishing processes of gears as well as heat treatment have to become more reliable and capable. Current developments regarding gear finishing processes will be introduced during the seminar. Furthermore challenges and opportunities of these processes will be presented.
Experts from R&D and manufacturing will show the advantages of different technological opportunities. Also the influences of tool design and process strategy will be presented. In terms of an integral view of the whole process chain, quality and grinding burn control as well as innovative developments in the field of heat treatment will be also addressed.





Dipl. Betriebswirtin (VWA) Svenja Wesch , M.A.
Tel.: +49 (0)241 / 80 27596
Fax: +49 (0)241 / 80 22575
E-Mail: s.wesch@wzl.rwth-aachen.de


The event language is German, simultaneous interpretation into English will be provided.

08.11.2017

time

topics

09.15 Welcome and Introduction
Prof. Dr.-Ing. Dr.-Ing. E.h. Dr. h.c. Dr. h.c Fritz Klocke, WZL, RWTH Aachen
09.30 Data Based Manufacturing – A Paramount for Gear Manufacturing?
Dr. Gregor Kappmeyer, Rolls-Royce Deutschland Ltd.
Intelligent Hard Finishing of Gears
10.00 Hard Finishing Next Generation – Intelligent, Intuitive, Productive
Peter Stich & Friedrich Wölfel, KAPP Werkzeugmaschinenfabrik GmbH
10.30 Gear Grinding „Customised“
Dr. Andreas Mehr, Liebherr-Verzahntechnik GmbH
11.00 Coffee Break
11.30 Closed Loop – Machining Cylindrical Gears Means Learning from Bevel Gear Manufacturing
Dr. Markus Brumm, Klingelnberg GmbH
12.00 Wear Modelling for Generating Gear Grinding
Matthias Ophey, WZL, RWTH Aachen
12.30 Lunch
Hard Finishing with Defined Cutting Edge
14.00 5-Axis-Milling of Gears – Requirements for the Manufacturing Environment
Dr. Rafael Bieker, GIFmbH & Co. KG.
14.30 Hard Scudding® – Dry Hard Finishing of Gears
Dr. Gerd-Thomas Weber, Profilator GmbH
15.00 Hard Finishing of Internal Gears by Power Skiving
Dr. Edgar Weppelmann, Gleason-Pfauter Maschinenfabrik GmbH
15.30 Coffee Break
Quality Control
16.00 Complete Measurement of Gear Components
Dr. Christof Gorgels, Klingelnberg GmbH
16.30 Grinding Burn Detection by Surface Temper Etching According to ISO 14104 – How Reliable is the Process?
Dr. Antje Zösch, IMQ GmbH
17.00 Visit of WZL Laboratory
19.30 Soiree

09.11.2017

time

topics

Functionally Optimized Properties of the Surface Near Zone
09.30 Polishing in the Series Production – An Experience Report
Dr. Ulrich Thies & Philipp Mayer, Daimler AG
10.00 Simulative Analysis of the Manufacturing of Topological Flank Modifications for Beveloid Gears
Jens Brimmers, WZL, RWTH Aachen
10.30 Deep Rolling of Gears
Dr. Karsten Röttger, Ecoroll AG
11.00 Coffee Break
Influence of Material and Cooling Lubricant
11.30 Possibilities to Improve the Mechanical Machinability of Case Hardened Parts in the Steel Production
Dr. Frank Hippenstiel, BGH Edelstahl Siegen GmbH
12.00 Lunch Break
13.30 Gear Machining –The right Coolant Determines the Success
Daniele Kleinmann, Rhenus Lub GmbH & Co. KG
14.00 Meeting the Requirements of the Cooling Lubricant Supply in Gear Grinding
Dr. Dirk Friedrich, Grindaix GmbH
14.30 Final Discussion

Please fill in the form for your registration:








selected services:

Event:

declare option:

The total sum: ,-€


Registrations will be considered in the order of their reception. In case of cancellation up to one week before the event, an administration charge of Euro 100,- will apply. For no shows or cancellations within one week of the event, the full fee will be charged. Please do not pay before receiving the invoice


Please complete the fields below:






  oder  











     

parking permit ? (please fill in)

The RWTH Aachen has introduced her parking management with parking controls in her areas. Therefore you need a parking permit for parkzone U when visiting us with your own or rented car. We therefore kindly ask you to inform us whether you need a parking ticket or not. If you need a ticket we will send it to you. There will be no additional costs for you but we have to pay for it, so we kindly ask you to order a ticket only in case you really need one.
You find the corresponding parking area of parkzone U in the Forckenbeckstrasse (Visit WZLforum)
In the area around our seminar building the traffic and parking situation is affected by construction work of the RWTH Aachen Campus. We hope for your understanding. If you have got any questions, please do not hesitate to contact us.






Exclusively for the purpose of postal submission of similar offers my name and address will be electronically processed and saved (subject to our AGB). We would appreciate to sent you our seminar-information:




Kontakt

WZLforum gGmbH

Steinbachstr. 25

52074 Aachen

Tel +49 241 80 23614


info@wzlforum.rwth-aachen.de


Folgen Sie uns auch auf

facebook Xing